英國 Delta-controls 膜片壓力開關(guān) S24

S24 PRESSURE SWITCH

Industrial Series

High Overload

The model S24 Pressure Switch is suitable for setpoints between 0.4bar and 700 bar with maximum working pressures up to 1000 bar.

• FEATURES & BENEFITS

1.  Better than 1% set-point repeatability
   Users can expect a set-point repeatability performance better than 1% on all configurations with some configurations being significantly better
2.  Extensive range of approvals
   The Industrial Series switches are available with wide range of different approvals including European and North American Hazardous Area approvals
3.  Safety
   All Industrial Series models come with a safety vent to prevent the enclosure becoming pressurized in the event that the sensor is inadvertently damaged by excessive pressure. In addition, all models have been certified for use in safety systems up to and including SIL 2.
4. DOCUMENTATION

5. Operational instructions

6. IOM-S20.pdf
7. NEC 500 Explosionproof
8. NEC 500 Intrinsic Safety
9. GPN Permit (Belarus)
10. ATEX Ex d
11. ATEX Ex ia
12. PED CAT IV
13. SIL 2

14. Approvals

    Technical datasheet

15. TDS-S20.pdf
16. SUPPORT
17. Technical advice 
18. Installation support 
19. Recalibration 
20. Local support 
21. Instrumentation repairs 
22. Spare parts
23.  
24.  

The Industrial Series switches were developed in the mid-1990's to offer customers a robust range of switches suitable for applications where requirements were more standard than those for which the highly configurable Performance Series switches were designed.

Using diaphragm based sensors and a more traditional in-line force balance mechanism to transfer movement from the sensor to the microswitch, these switches are suitable for a wide range of industrial applications. Various international approvals make the Industrial Series suitable for use in both safe and Hazardous Areas in Europe, North America and throughout the world.

With the recent launch of the Sentry Series, these Industrial models are now recommended mainly for aftermarket applications where a like for like replacement is needed.

• Epoxy coated aluminium or stainless steel housings approved to IP66 and NEMA 4X
• SPDT and DPDT switch contacts with environmentally and hermetically sealed options
• Stainless steel wetted parts as standard
• Better than 1% set-point repeatability
• Pressure ranges from 0.4 to 700 bar 
• Pmax up to 1000 bar depending on range

• This is the introduction of the Delta-controls  model S24  Pressure Switch  ,if you are interesting in it ,please contact us.